Language: UA RU EN

ECG recorder model DC-12010

General information:

 ,  DC-12010

 

The ECG registrar model 12010 is a portable self-powered device, designed for ECG recording from 1 to 12 leads and transfer to the Android-device: tablet, smartphone, etc., with pre-installed software DiaCard-ECG Recorder, running on Android 4.4 and above.

Registrar can be used as a standalone device for ambulatory ECG monitoring, «heart monitor» observations, as part of the online monitoring system Telecardian, Diaard, Holter systems, as well as in a standalone computer cardiograph in various areas of medical research.

User's Guide, PDF.

Capabilities:

  • ECG recording in «on-line» mode, heart rate calculation, the control of electrodes breakage;
  • Viewing of 1, 3, 6 (7) or 12 channels, the speed change, amplification, digital filtering;

  • «Heart monitor» mode with the installation of alarms: bradycardia, tachycardia, a pause;

  • «Event» monitoring, with preservation of backstory from 30 seconds to 5 minutes before and after an event;

  • prompt addition of comments for each event recorded fragment;

  • The ECG recording in the internal memory of PPC (up to 24 hours), operating with the archive;

  • Processing (contour analysis), report generation, output to a printer or to a file (.pdf);
  • Dispatch (transfer) of records and / or reports by e-mail, to the call-center, and so on. 

Application area: 

  • Department of cardiology and functional diagnostics;
  • Emergency services of general (civil) profile;
  • Remote monitoring centers, call-centers;
  • Transport: road, rail, air, river and sea;
  • Sports medicine, for research purposes, expeditions;
  • in outpatient settings (remote control of cardiological patients. 

Design and working principle: 

  • Compliance with the requirements of safety standard IEC 601-1, CF class;

  • Protection of ECG inputs of the defibrillator pulses, IEC 601-2-27;

  • High input impedance, no blocking capacitors;

  • 24-bit delta-sigma ADC with a conversion rate of up to 32 kHz;

  • Digital signal processing on the basis of 32-bit MC family of ARM CORTEX-M3;

  • Control of electrodes breakage;

  • A wide range of cable types of leads;

  • Galvanic isolation of the analog and digital parts, ≥ 5000 B (RMS);

  • Modern control system based on 32-bit MC family of ARM CORTEX-M4, operating system, remote firmware update;

  • Built-in lithium-polymer battery with high capacity, charging mode controller, «current monitor» chip to calculate the charge / discharge of the battery capacity, charging from an external power supply or from the USB port, charging indicator light;

  • Graphic OLED display with maximum viewing angle (170 °), light sensor, display the current date and time, the voltage level on the battery, the mode, the current posts, the estimated remaining time recorder, Auto Power Off;

  • Communication interfaces: wireless — Bluetooth;

  • Controls - mechanical button - on / off recorder;

  • Data control, auto switch-off at idle, the minimum consumption in standby mode;

  • Robust housing made of ABC-plastic, convenient system of recorder fixation.

Specifications:

 Parameter

 Value

 Number of leads (of electrodes in the cable)

1 (3), 6 (4), 7 (5), 9 (7), 12 (10

 The electrode breakage control

 Yes 

 Input voltage range, ~ / =

±0.005 ÷ ± 5,0 / ± 300 mV 

 Frequency range

0÷100 Hz 

 Input impedance

 > 10 MOhm 

 The frequency of registration / transfer

2000 / 250, 500, 1000 Hz 

 Suppression of common mode noise

  100 dB 

 Digital filtering

 0.005, 0.01, 0.05, 25, 35, 50/60, 75 Hz 

 Recording duration

from 10 seconds to 24 hours

 Interfaces

Bluetooth 3.0  (SPP) Class 2 

 Display

OLED 0,96'' 128x64 monochrome 

 Power, battery type

Li-Pol; 3.7 V; 950 mA / h 

 Duration of operation / standby

 10 hour / 1 year

 Protection against defibrillator pulses

Yes 

 Safety

IEC60601-1. Class II, Type F 

 Overall dimensions, mm

1066019 mm 

 Weight (with the battery, without cable)

118 g 

Contents of delivery:

 Position

Q-ty

 The Registrar of DC-12010, pcs.

 Fixing belt, pcs.

 User's manual, brochure, pcs.

 Cardboard package, pcs.

1 

Accessories:

 Nomenclature

 Lead wires of 3, 4, 5, 7 or 10 wires - electrodes with different endings (plug 3 mm, 4 mm, button, clip), with instrumental connector DB-15M, D-SUB

 Chips — extenders for 3, 5, 7 or 10 sockets DIN-1.5mm, DB-15M, D-SUB
 Lead Wires DIN-1.5mm, button / clip
 Electrodes on the limbs of the «clothespin»type
 Thoracic suction bowl electrodes, for different age groups
 Disposable electrodes for ECG, different
 Gel-electrode conductive paste
 External control device (tablet, smartphone) with the OS Android 4.0 +

 Power supply AC ~ / 1.0A + 5V (USB-AF), to charge the registrar

 Power supply unit AC ~ / 2,0A + 5V (USB-AF), to charge the tablet

 A source of the autonomous energy supply of Powerbank type from 2200 mA / h and above
 Data-power microUSB cable (BM) / USB (AM), 1.8 m
 Cable OTG micro USB (BM) / USB (AF), 0.2 m
 Bag-packing with the logo «Paramedic. DiaCard», 305x260x70 mm

 Bag-over for mounting the registrar on the waistband

 Bag-Case for mounting Powerbank, on the belt
 Waist belt

Authentication

News

ECG recorders DC-06000.3X

05.03.2019

image

NEW!

Unique, ultra-lightweight, small-sized 1-6 channels ECG recorders — already in stock!

ECG recorder DC-06000.01

14.02.2017

image

1-6 channels ECG recorder, compatible with Telecardian and DiaCard systems.